Your IP : 216.73.216.1
/*-
* Copyright (c) 2006 Verdens Gang AS
* Copyright (c) 2006-2011 Varnish Software AS
* All rights reserved.
*
* Author: Poul-Henning Kamp <phk@phk.freebsd.dk>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* These macros define the common data for requests in the CLI protocol.
* The fields are:
* const char * upper-case C-ident request_name
* const char * request_name
* const char * request_syntax (for short help)
* const char * request_help (for long help)
* const char * documentation (for sphinx)
* int minimum_arguments
* int maximum_arguments
*/
/*lint -save -e525 -e539 */
CLI_CMD(BAN,
"ban",
"ban <field> <operator> <arg> [&& <field> <oper> <arg> ...]",
"Mark obsolete all objects where all the conditions match.",
"See :ref:`vcl(7)_ban` for details",
3, -1
)
CLI_CMD(BAN_LIST,
"ban.list",
"ban.list [-j]",
"List the active bans.",
" Unless ``-j`` is specified (for JSON output), "
" the output format is:\n\n"
" * Time the ban was issued.\n\n"
" * Objects referencing this ban.\n\n"
" * ``C`` if ban is completed = no further testing against it.\n\n"
" * if ``lurker`` debugging is enabled:\n\n"
" * ``R`` for req.* tests\n\n"
" * ``O`` for obj.* tests\n\n"
" * Pointer to ban object\n\n"
" * Ban specification",
0, 0
)
CLI_CMD(VCL_LOAD,
"vcl.load",
"vcl.load <configname> <filename> [auto|cold|warm]",
"Compile and load the VCL file under the name provided.",
"",
2, 3
)
CLI_CMD(VCL_INLINE,
"vcl.inline",
"vcl.inline <configname> <quoted_VCLstring> [auto|cold|warm]",
"Compile and load the VCL data under the name provided.",
" Multi-line VCL can be input using the here document"
" :ref:`ref_syntax`.",
2, 3
)
CLI_CMD(VCL_STATE,
"vcl.state",
"vcl.state <configname> [auto|cold|warm]",
"Force the state of the named configuration.",
"",
2, 2
)
CLI_CMD(VCL_DISCARD,
"vcl.discard",
"vcl.discard <configname|label>",
"Unload the named configuration (when possible).",
"",
1, 1
)
CLI_CMD(VCL_LIST,
"vcl.list",
"vcl.list [-j]",
"List all loaded configuration.",
"``-j`` specifies JSON output.",
0, 0
)
CLI_CMD(VCL_SHOW,
"vcl.show",
"vcl.show [-v] <configname>",
"Display the source code for the specified configuration.",
"",
1, 2
)
CLI_CMD(VCL_USE,
"vcl.use",
"vcl.use <configname|label>",
"Switch to the named configuration immediately.",
"",
1, 1
)
CLI_CMD(VCL_LABEL,
"vcl.label",
"vcl.label <label> <configname>",
"Apply label to configuration.",
"",
2, 2
)
CLI_CMD(PARAM_RESET,
"param.reset",
"param.reset <param>",
"Reset parameter to default value.",
"",
1,1
)
CLI_CMD(PARAM_SHOW,
"param.show",
"param.show [-l|-j] [<param>|changed]",
"Show parameters and their values.",
"The long form with ``-l`` shows additional information, including"
" documentation and minimum, maximum and default values, if defined"
" for the parameter. JSON output is specified with ``-j``, in which"
" the information for the long form is included; only one of ``-l`` or"
" ``-j`` is permitted. If a parameter is specified with ``<param>``,"
" show only that parameter. If ``changed`` is specified, show only"
" those parameters whose values differ from their defaults.",
0, 2
)
CLI_CMD(PARAM_SET,
"param.set",
"param.set <param> <value>",
"Set parameter value.",
"",
2,2
)
CLI_CMD(SERVER_STOP,
"stop",
"stop",
"Stop the Varnish cache process.",
"",
0, 0
)
CLI_CMD(SERVER_START,
"start",
"start",
"Start the Varnish cache process.",
"",
0, 0
)
CLI_CMD(PING,
"ping",
"ping [-j] [<timestamp>]",
"Keep connection alive.",
"The response is formatted as JSON if ``-j`` is specified.",
0, 1
)
CLI_CMD(HELP,
"help",
"help [-j] [<command>]",
"Show command/protocol help.",
"``-j`` specifies JSON output.",
0, 1
)
CLI_CMD(QUIT,
"quit",
"quit",
"Close connection.",
"",
0, 0
)
CLI_CMD(SERVER_STATUS,
"status",
"status [-j]",
"Check status of Varnish cache process.",
"``-j`` specifies JSON output.",
0, 0
)
CLI_CMD(BANNER,
"banner",
"banner",
"Print welcome banner.",
"",
0, 0
)
CLI_CMD(AUTH,
"auth",
"auth <response>",
"Authenticate.",
"",
1, 1
)
CLI_CMD(PANIC_SHOW,
"panic.show",
"panic.show [-j]",
"Return the last panic, if any.",
"``-j`` specifies JSON output -- the panic message is returned as an"
" unstructured JSON string.",
0, 0
)
CLI_CMD(PANIC_CLEAR,
"panic.clear",
"panic.clear [-z]",
"Clear the last panic, if any,"
" -z will clear related varnishstat counter(s)",
"",
0, 1
)
CLI_CMD(DEBUG_LISTEN_ADDRESS,
"debug.listen_address",
"debug.listen_address",
"Report the actual listen address.",
"",
0, 0
)
CLI_CMD(BACKEND_LIST,
"backend.list",
"backend.list [-j] [-p] [<backend_pattern>]",
"List backends. -p also shows probe status.",
"``-j`` specifies JSON output.",
0, 2
)
CLI_CMD(BACKEND_SET_HEALTH,
"backend.set_health",
"backend.set_health <backend_pattern> [auto|healthy|sick]",
"Set health status on the backends.",
"",
2, 2
)
CLI_CMD(DEBUG_FRAGFETCH,
"debug.fragfetch",
"debug.fragfetch",
"Enable fetch fragmentation.",
"",
1, 1
)
CLI_CMD(DEBUG_REQPOOLFAIL,
"debug.reqpool.fail",
"debug.reqpool.fail",
"Schedule req-pool failures.",
"The argument is read L-R and 'f' means fail:\n\n"
"\tparam.set debug.reqpoolfail F__F\n\n"
"Means that the frist and the third attempted allocation will fail",
1, 1
)
CLI_CMD(DEBUG_XID,
"debug.xid",
"debug.xid",
"Examine or set XID.",
"",
0, 1
)
CLI_CMD(DEBUG_SRANDOM,
"debug.srandom",
"debug.srandom",
"Seed the random(3) function.",
"",
0, 1
)
CLI_CMD(DEBUG_PANIC_WORKER,
"debug.panic.worker",
"debug.panic.worker",
"Panic the worker process.",
"",
0, 0
)
CLI_CMD(DEBUG_PANIC_MASTER,
"debug.panic.master",
"debug.panic.master",
"Panic the master process.",
"",
0, 0
)
CLI_CMD(DEBUG_VMOD,
"debug.vmod",
"debug.vmod",
"Show loaded vmods.",
"",
0, 0
)
CLI_CMD(DEBUG_PERSISTENT,
"debug.persistent",
"debug.persistent [<stevedore>] [<cmd>]",
"Persistent debugging magic:\n"
"With no cmd arg, a summary of the silo is returned.\n"
"Possible commands:\n"
"\tsync\tClose current segment, open a new one\n"
"\tdump\tinclude objcores in silo summary",
"",
0, 2
)
CLI_CMD(STORAGE_LIST,
"storage.list",
"storage.list [-j]",
"List storage devices.",
"``-j`` specifies JSON output.",
0, 0
)
CLI_CMD(PID,
"pid",
"pid [-j]",
"Show the pid of the master process, and the worker if it's running.",
" ``-j`` specifies JSON output.",
0, 0
)
#undef CLI_CMD
/*lint -restore */